Segway SE-3 Patroller Instrukcja Użytkownika Pobierz pdf (Strona 65)

Info SE-3 Setup Operate Riding

Tips

Battery Maintain T-shoot Warn Contact

Index Schedule

Rear Tire/Wheel Installation

1. Make sure the SE-3 Patroller is powered off, unplugged, and the

parking brake is engaged.

2. Jack up the SE-3 Patroller (Figure 50).

3. Make sure all mounting surfaces are clean and free of debris.

4. Slide the wheel onto the four studs.

5. Using the wheel nut key, install the four Wheel Nuts, a little more

than hand tight.

6. Lower the SE-3 Patroller and remove the jack.

7. Using the wheel nut key, torque the four Wheel Nuts to 55 N-m

(40 ft-lbf). Torque nuts in a cross pattern: top, bottom, left, right

(Figure 51).

Replacing the Front Tire/Wheel

Segway recommends the front tire/wheel be serviced or replaced by a Segway

trained and certiﬁed technician. Contact your local dealer or Segway for your

servicing needs:

Phone: 1-866-4SEGWAY (1-866-473-4929)

Website: www.segway.com

Figure 51: Installing a Rear Wheel

Torque the four Wheel Nuts

in a cross pattern

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 91 92

Brak uwag

Segway SE-3 Patroller Instrukcja Użytkownika Strona 65