Segway SE-3 Patroller Instrukcja Użytkownika Pobierz pdf (Strona 63)

Info SE-3 Setup Operate Riding

Tips

Battery Maintain T-shoot Warn Contact

Index Schedule

Checking Tires for Wear

Over time, the tires on the SE-3 Patroller will wear and need replacing.

WARNING

Do not ride the Segway SE-3 Patroller with excessively worn tires (Figure 49).

A tire could burst, causing personal injury or damage to the SE-3 Patroller.

Front Tire

1. Make sure the SE-3 Patroller is powered off and unplugged.

2. Apply the parking brake (p. 24).

3. Measure the depth of the treads (Table 7). If the tread depth is at or

below 2 mm, replace the tire.

Rear Tires

1. Make sure the SE-3 Patroller is unplugged and powered off.

2. Apply the parking brake (p. 24).

3. Locate the tread wear indicators in the landings between treads.

If the treads are worn down level with the tread wear indicators,

replace the tire.

Alternately, measure the depth of the treads (Table 7). If the tread

depth is at or below 3.8 mm, replace the tire.

NOTE

To replace the tires, contact an Authorized Segway Dealer or Distributor, or

Segway Customer Care. For a list of Authorized Dealers and Distributors, visit

www.segway.com.

Tire Minimum Tread Depth

Front Tire 2 mm

Rear Tires 3.8 mm (or when the tread is ﬂush

with the tread wear indicators)

Table7:TireWearSpecications

Figure 49: Do not drive on worn out tires

Excessive tread wear

Front Rear

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 91 92

Brak uwag

Segway SE-3 Patroller Instrukcja Użytkownika Strona 63